Posted by admin | Posted in electrical and solar | Posted on 10-09-2011
Hybrid Charger
how much does it cost to have a turbo charger installed?
i would like to know on average how much it would cost me to install a turbo on my 2001 eclipse gt i found a turbo that i am going to buy it is a t3/t4 hybrid turbo and what other parts would i need and how much would it cost
Complete kits can cost a few thousand and go up depending on what you want or you can gather up all the parts you need individually for cheaper but you have to know what you're doing. You're looking for a manifold for your specific engine and turbo, piping, intercooler if you want to run more than a few pounds of boost, larger injectors to handle the fuel, engine management in most setups, and the list goes on. I'm completely unfamiliar with Eclipses but these are basic parts you need for any most any setup but this isn't all you need. For more details check out some forums dedicated to these cars, these guys might be a good place to start (took a couple seconds to google them): http://mitsubishiforum.com/forum/
Posted by admin | Posted in electrical and solar | Posted on 31-08-2011
Charger Phone
Is there another cell phone charger that would work with the Virgin Mobile Super Slice?
I'm leaving for a trip tomorrow and I lost my charger. I can't buy one at a local store but is there another phone's charger that would actually charge the Super Slice?
**Another phone meaning..anything other than Virgin Mobile products**
a Razor charger will do the trick
they both have USB ports for charging. I have done this before
Hope this helps
Posted by admin | Posted in electrical and solar | Posted on 20-08-2011
Charger Mobile Phone
What size generator do I need to run a pos terminal (credit card machine), a lamp, a mobile phone charger?
We need to obtain a silent generator to take on promotional visits. We need to run a credit card machine, mobile phone charger, display (one lamp) and possible a lamp
POS terminals are not very useful unless they are connected to the network of the bank.
But, look up the power requirements of each item, add them up, and get a generator that size or larger.
.
Posted by admin | Posted in electrical and solar | Posted on 20-07-2011
Panel Charger Power
Please, does anybody know a good reliable website, that you can pay by debit.?
That has a small, reliable, solar panel powered portable charger and parts that can charge an ipod or cell phone. And can somebody explain the parts of a solar panel and how it works? PLEASE!
check amazon, you can pay through a checking account and they have many things. I think the parts should be a separate question...
Posted by admin | Posted in electrical and solar | Posted on 19-07-2011
Charger Pda
What will happen if I charge my PDA with the same voltage charger but a slightly higher amp?
The original charger output is 5V and 1AMP but the new charger is 5V and 1.5AMP.
Will it make any difference? Will my PDA be fried up?
Appreciate your help.
The current rating on the new power supply of 1.5 amps means it can be loaded up with higher batteries.
No you will not fry your PDA. And there is now worry on the PDA getting damaged due to just a change in higher current rating. A higher voltage rating would mess your PDA.
Here is an analogy...
Imagine current as the flow of water in a pipe, a 1amp to 1.5 amp means you have higher flow of water.
The 5volts is your pail. This means you want to fill up you pail with 5volts of water. Using the 1.5 amp supply - higher flow of water, you will fill up the pail faster. It does not damage the pail but it fills it up faster.
The only time you would damage your PDA is when you over charge it, which means you keep it plugged in even when the charge light already said it is fully charged. But in better PDA's this should not be a problem since the charger circuit has an overcharge and temp overload protection circuit. It just makes you battery life shorter due to overheating the battery.